avrdude: Version 5.11svn-20111019, compiled on Feb 22 2012 at 21:21:50 Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/ Copyright (c) 2007-2009 Joerg Wunsch System wide configuration file is "/usr/local/etc/avrdude.conf" User configuration file is "/home/marian/.avrduderc" User configuration file does not exist or is not a regular file, skipping Using Port : usb Using Programmer : usbasp AVR Part : ATMEGA8 Chip Erase delay : 10000 us PAGEL : PD7 BS2 : PC2 RESET disposition : dedicated RETRY pulse : SCK serial program mode : yes parallel program mode : yes Timeout : 200 StabDelay : 100 CmdexeDelay : 25 SyncLoops : 32 ByteDelay : 0 PollIndex : 3 PollValue : 0x53 Memory Detail : Block Poll Page Polled Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- --------- eeprom 4 20 128 0 no 512 4 0 9000 9000 0xff 0xff flash 33 10 64 0 yes 8192 64 128 4500 4500 0xff 0x00 lfuse 0 0 0 0 no 1 0 0 2000 2000 0x00 0x00 hfuse 0 0 0 0 no 1 0 0 2000 2000 0x00 0x00 lock 0 0 0 0 no 1 0 0 2000 2000 0x00 0x00 calibration 0 0 0 0 no 4 0 0 0 0 0x00 0x00 signature 0 0 0 0 no 3 0 0 0 0 0x00 0x00 Programmer Type : usbasp Description : USBasp, http://www.fischl.de/usbasp/ avrdude: auto set sck period (because given equals null) avrdude: warning: cannot set sck period. please check for usbasp firmware update. avrdude: AVR device initialized and ready to accept instructions Reading | ################################################## | 100% 0.01s avrdude: Device signature = 0x1e9307 avrdude: safemode: lfuse reads as FF avrdude: safemode: hfuse reads as C9 avrdude: NOTE: FLASH memory has been specified, an erase cycle will be performed To disable this feature, specify the -D option. avrdude: erasing chip avrdude: auto set sck period (because given equals null) avrdude: warning: cannot set sck period. please check for usbasp firmware update. avrdude: reading input file "/home/marian/Programy/AVR/LED/Release/LED.hex" avrdude: input file /home/marian/Programy/AVR/LED/Release/LED.hex auto detected as Intel Hex avrdude: writing flash (104 bytes): Writing | ################################################## | 100% 0.04s avrdude: 104 bytes of flash written avrdude: verifying flash memory against /home/marian/Programy/AVR/LED/Release/LED.hex: avrdude: load data flash data from input file /home/marian/Programy/AVR/LED/Release/LED.hex: avrdude: input file /home/marian/Programy/AVR/LED/Release/LED.hex auto detected as Intel Hex avrdude: input file /home/marian/Programy/AVR/LED/Release/LED.hex contains 104 bytes avrdude: reading on-chip flash data: Reading | ################################################## | 100% 0.05s avrdude: verifying ... avrdude: verification error, first mismatch at byte 0x0040 0xff != 0xac avrdude: verification error; content mismatch avrdude: safemode: lfuse reads as FF avrdude: safemode: hfuse reads as C9 avrdude: safemode: Fuses OK avrdude done. Thank you.