AVR Downloader/UploaDEr - Bugs: bug #40493, Can't program boot section of...
You are not allowed to post comments on this tracker with your current authentication level.
bug #40493: Can't program boot section of xmega256a3
Submitter: | None | ||
Submitted: | Wed 06 Nov 2013 04:14:29 PM UTC | ||
Category: | None | Severity: | 3 - Normal |
Priority: | 5 - Normal | Item Group: | None |
Status: | None | Privacy: | Public |
Assigned to: | None | Originator Name: | avrdude |
Originator Email: | -email is unavailable- | Open/Closed: | Open |
Release: | None | Programmer hardware: | |
Device type: |
Attached Files
file #29547: atxmega.hex added by None (2KiB - application/octet-stream)
Depends on the following items: None found
Items that depend on this one: None found
Carbon-Copy List
There are 0 votes so far. Votes easily highlight which items people would like to see resolved in priority, independently of the priority of the item set by tracker managers.
Follows 1 latest change.
Date | Changed by | Updated Field | Previous Value | => | Replaced by |
---|---|---|---|---|---|
2013-11-06 | None | Attached File | - | Added atxmega.hex, #29547 |
Powered by Savane 3.13-cf05.
Corresponding source code
I'm using avrdude 6.01 and JTAGICEmkII and try to programm the boot section
of the xmega256a3 with the following command:
avrdude -c jtag2pdi -P usb -p x256a3 -e -U flash:w:atxmega.hex:i
Output of avrdude:
avrdude: AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% 0.01s
avrdude: Device signature = 0x1e9842
avrdude: erasing chip
avrdude: reading input file "atxmega.hex"
avrdude: writing flash (262232 bytes):
Writing | ################################################## | 100% 0.05s
avrdude: 262232 bytes of flash written
avrdude: verifying flash memory against atxmega.hex:
avrdude: load data flash data from input file atxmega.hex:
avrdude: input file atxmega.hex contains 262232 bytes
avrdude: reading on-chip flash data:
Reading | ################################################## | 100% 0.03s
avrdude: verifying ...
avrdude: verification error, first mismatch at byte 0x40000
0xff != 0xcf
avrdude: verification error; content mismatch
avrdude done. Thank you.
When i use the same hex file and program my device with AtmelStudio 6.1
everything is ok. This means my JTAGICEmkII works correct.