taskSavannah Administration - Tasks: task #12057, Submission of paranoia auto-backup

 
 

task #12057: Submission of paranoia auto-backup

Submitted by:  Juan Quiroga <quiro9>
Submitted on:  Fri 25 May 2012 08:05:31 AM UTC  
 
Should Start On:  Fri 25 May 2012 03:00:00 AM UTC Should be Finished on:  Mon 04 Jun 2012 03:00:00 AM UTC
Category:  Project Approval Priority:  5 - Normal
Status:  Done Privacy:  Public
Percent Complete:  100% Assigned to:  Aljosha Papsch <alip2890>
Open/Closed:  Closed Effort:  0.00

Add a New Comment (Rich Markup)
   

You are not logged in

Please log in, so followups can be emailed to you.

 

( Jump to the original submission)

Mon 04 Jun 2012 12:09:56 PM UTC, comment #9: 

thanks for the approval!

i was without internet that was the reason for the delay. then update it every day

:) regards

Juan Quiroga <quiro9>
Sun 03 Jun 2012 07:46:31 PM UTC, comment #8: 

Just one thing, the license for this project as you mention the wrong place. This is the GPL v3 is not AGPL v3 ...
Now also has documentation files FDL v1.3

Not sure if that can correct me later, but if I can not change, please set a correct license.

The tarball is up... Tanks for all.

(file #25973)

Juan Quiroga <quiro9>
Sun 03 Jun 2012 07:45:37 PM UTC, comment #7: 

Hi,

I looked over at the tarball from task 12071 (which you should still upload here) and everything is looking fine besides two minor things, which you can fix or not fix:

  • The COPYING file in paranoia_auto-backup/share/doc/paranoia/ is better placed in the top-level directory, named as COPYING.FDL
  • What I meant with "top-level directory" in the other message was that you have one directory (e.g. paranoia_auto-backup) and put all files in there, including README, LEEME, etc.

Nonetheless I have approved your project.  You will receive an automated e-mail containing detailed information about the approval.

Have fun! :)

Regards.

Aljosha Papsch <alip2890>
Project MemberIn charge of this item.
Sun 03 Jun 2012 07:32:38 PM UTC, comment #6: 

Only a one thing, the license for this project as you mention this wrong place. This is GPL v3, is not AGPL v3.
Also now is specific the documentation and "README" files with FDL v1.3.

Do not know if this I can correct it later, but if I can not Change, please set a correct licenses.

the tarball file now is upload... regards and tanks for all...

Juan Quiroga <quiro9>
Sun 03 Jun 2012 06:58:48 PM UTC, comment #5: 

Hi,

I can delete the project you submitted newly. Please upload the tarball from the new task here again, so everything is consistently archived. You can do this below at section Attached Files as xenu mentioned.

Regards.

Aljosha Papsch <alip2890>
Project MemberIn charge of this item.
Sun 03 Jun 2012 06:20:39 PM UTC, comment #4: 

Just went up the other as a new project with the same name ...
I never saw that option ...
Sorry I am a bit rushed sometimes ...

I can not delete the item again or this?, if I can not never see a option ...

recently also see this link:
https://savannah.gnu.org/register/requirements.php
I read right now

Juan Quiroga <quiro9>
Sun 03 Jun 2012 06:11:57 PM UTC, comment #3: 

Hi!

Use "Attached Files" section in this page.

Regards,
Tomasz

Tomasz Konojacki <xenu>
Project Member
Sun 03 Jun 2012 05:48:36 PM UTC, comment #2: 

Thanks for all your suggestions and corrections were applied.
If I may (I have corrected all) I will reupload the file, the project at this time I move a lot, and works well and is optimized.

I wanted to be staying in Savannah for my commitment to free software.

regards

Juan Quiroga <quiro9>
Fri 01 Jun 2012 04:17:27 PM UTC, comment #1: 

Hi,

thanks for submitting your project to Savannah! I looked over your tarball and noticed the following problematic things:

Your tarball does not contain a top-level directory. This way you could confuse users since someone might not extract the tarball in an empty directory. I recommend to move all files in a top-level directory.

You use unusual names for files. I recommend to use COPYING instead of GPL and README instead of INFO.

The INFO file contains almost only Spanish language. Even though English is not required in a README file, I urge you to do so.

One section in INFO looked suspiciously like a license information. I translated it and got "You may copy, modify, share the program or its amended as stated in the GNU / GPL in its Version 3.".  However, at Savannah we require that if you release your program under GPL, you include the saying "or (at your option) any later version". Please amend this.

Every copyrightable file longer than 10 lines needs a proper copyright and license header. The websites [1] and [2] contain information on how to this. Please update the files, including source files, the INFO file, HTML files, etc. You need to do this for image files as well, either by adding a comment to the file or stating copyright and license in INFO. If it is not possible to add comments to the language files in media/language, do this in INFO as well.

And one last thing: You submitted your project specifying AGPL v3 or later. Your GPL file however contains a copy of GPL v3 or later. Please choose what to do:

  • You replace the GPL file with a verbatim copy of the AGPL v3 and add license headers saying AGPL v3 or later.
  • You add license headers saying GPL v3 or later and I create your project with GPL v3 or later.

If this seems like an awful lot of work to do, I can only assure you that you ease the lives of everyone by doing this. Most points are also needed to fulfill the Savannah hosting requirements [3] and avoid legal issues.

Regards.

[1] https://www.gnu.org/licenses/gpl-howto.html
[2] https://www.gnu.org/prep/maintain/html_node/Copyright-Notices.html
[3] https://savannah.gnu.org/register/requirements.php

Aljosha Papsch <alip2890>
Project MemberIn charge of this item.
Fri 25 May 2012 08:05:31 AM UTC, original submission:  

A new project has been registered at Savannah
This project account will remain inactive until a site admin approves or discards the registration.

Registration Administration

While this item will be useful to track the registration process, approving or discarding the registration must be done using the specific Group Administration page, accessible only to site administrators, effectively logged as site administrators (superuser):

Registration Details

  • Name: paranoia auto-backup
  • System Name:  paranoia
  • Type: non-GNU software & documentation
  • License: GNU Affero General Public License v3 or later

Description:

-- ENGLISH --
"PARANOIA AUTO-BACKUP" try to save data periodically added by the user.
The idea of ​​this program is to prevent the loss of important data that can be removed easily, making a backup (compressed as Tarball .TGZ) each a definite time.
It also has other settings for the best adaptation to their circumstances

-- ESPAÑOL --
"PARANOIA AUTO-BACKUP" intenta guardar periódicamente datos agregados por el usuario.
La idea de este programa es prevenir la pérdida de datos importantes que se pueden eliminar con facilidad, realizando una copia de seguridad (comprimido como Tarball .TGZ) cada un tiempo definido.
También cuenta con otras configuraciones para la mayor adaptación posible a su situación

Other Software Required:

python >> http://python.org/
{time,os,timedate,random,(pygtk)}

GTK+ >= 2.2 >> http://gtk.org/

-- system command (linux) --
tar (tarball), notify-send (notify), dir, mkdir, rm.

Other Comments:

-- ENGLISH --
The software and all content is free under GNU/GPL3 license.
The software is as it is and does what he does.
Dispatched to be useful, but without guarantee.

-- ESPAÑOL --
El software y todo el contenido que incluye es libre bajo licencia GNU/GPL3.
El software es como es, y hace lo que hace.
Se distribuye con el fin de ser útil, pero sin garantías.

Tarball URL:

http://savannah.gnu.org/submissions_uploads/paranoia%20auto-backup_%5Bv0.3.59%5D%5D.tar.gz

Juan Quiroga <quiro9>

 

(Note: upload size limit is set to 16384 kB, after insertion of the required escape characters.)

Attach Files:
   
   
Comment:
   

Attached Files
file #25973:  paranoia_auto-backup[v0.3.75d].tar.gz added by quiro9 (84KiB - application/x-gzip - new version of paranoia backup 0.3.75d)

 

Depends on the following items: None found

Items that depend on this one: None found

 

Carbon-Copy List
  • -email is unavailable- added by xenu (Posted a comment)
  • -email is unavailable- added by alip2890 (Posted a comment)
  • -email is unavailable- added by quiro9 (personal email to contact - email personal para contacto)
  • -email is unavailable- added by quiro9 (Submitted the item)
  •  

    Do you think this task is very important?
    If so, you can add your encouragement to it.
    This task has 0 encouragements so far.

    Only logged-in users can vote.

     

     

     

    Follow 7 latest changes.

    Date Changed by Updated Field Previous Value => Replaced by
    2012-06-03 alip2890 Open/ClosedOpen => Closed
    2012-06-03 quiro9 Attached File- => Added paranoia_auto-backup[v0.3.75d].tar.gz, #25973
    2012-06-03 alip2890 StatusIn Progress => Done
        Percent Complete0% => 100%
    2012-06-01 alip2890 StatusNone => In Progress
        Assigned toNone => alip2890
    2012-05-25 quiro9 Carbon-Copy- => Added juanquiroga@lavabit.com

    Back to the top


    Powered by Savane 3.5