bugHddtemp - Bugs: bug #33617, please add ST3160815A to the...

 
 

bug #33617: please add ST3160815A to the database

Submitter:  None
Submitted:  Wed 22 Jun 2011 03:00:28 AM UTC
   
 
Category:  None Severity:  3 - Normal
Item Group:  None Status:  None
Privacy:  Public Assigned to:  None
Open/Closed:  Open
* Mandatory Fields

Add a New Comment Rich Markup
   

Wed 22 Jun 2011 03:00:28 AM UTC, original submission:  

Field 194 seems consistent.

I tried to make some files transfert and the value was increasing. Then if left the drive inactive the value decrease.

I have two drives of that model and both acts the same way.

While compiling, the heat in the chassis rise, the temperature repported by both drives and a third already in the DB rise roughtly the same amount.

Here is and hddtemp --debug and a smartctl -a :

================= hddtemp 0.3-beta15 ==================
Model: ST3160815A

field(1) = 67
field(3) = 0
field(4) = 71
field(5) = 0
field(7) = 9
field(9) = 254
field(10) = 0
field(12) = 70
field(187) = 0
field(189) = 0
field(190) = 39
field(194) = 39
field(195) = 35
field(197) = 0
field(198) = 0
field(199) = 0
field(200) = 0
field(202) = 0


smartctl 5.41 2011-06-09 r3365 [i686-linux-2.6.39-gentoo-r1] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

START OF INFORMATION SECTION

Model Family:     Seagate Barracuda 7200.10
Device Model:     ST3160815A
Serial Number:    5RA9P3TN
Firmware Version: 3.AAD
User Capacity:    160,041,885,696 bytes [160 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   7
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Wed Jun 22 04:52:01 2011 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

START OF READ SMART DATA SECTION

SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (  430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: (   1) minutes.
Extended self-test routine
recommended polling time: (  54) minutes.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   118   099   006    Pre-fail  Always       -       187714627
  3 Spin_Up_Time            0x0003   098   097   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       71
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   081   060   030    Pre-fail  Always       -       137284753
  9 Power_On_Hours          0x0032   079   079   000    Old_age   Always       -       18686
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       70
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   061   055   045    Old_age   Always       -       39 (Min/Max 36/40)
194 Temperature_Celsius     0x0022   039   045   000    Old_age   Always       -       39 (0 22 0 0)
195 Hardware_ECC_Recovered  0x001a   077   075   000    Old_age   Always       -       48453435
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0000   100   253   000    Old_age   Offline      -       0
202 Data_Address_Mark_Errs  0x0032   100   253   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Anonymous

 

(Note: upload size limit is set to 16384 kB, after insertion of the required escape characters.)

Attach Files:
   
   
Comment:
   

No files currently attached

 

Depends on the following items: None found

Items that depend on this one: None found

 

CC list is empty

 

There are 0 votes so far. Votes easily highlight which items people would like to see resolved in priority, independently of the priority of the item set by tracker managers.

Only logged-in users can vote.

 

No changes have been made to this item

Back to the top

Powered by Savane 3.13-3230.
Corresponding source code