> hddtemp --debug /dev/sda ================= hddtemp 0.3-beta15 ================== Model: WDC WD2500BEVS-75UST0 field(1) = 0 field(3) = 105 field(4) = 41 field(5) = 0 field(7) = 0 field(9) = 213 field(10) = 0 field(11) = 0 field(12) = 243 field(192) = 67 field(193) = 31 field(194) = 41 field(196) = 0 field(197) = 0 field(198) = 0 field(199) = 0 field(200) = 0 field(240) = 45 field(241) = 68 field(242) = 210 If one of the field value seems to match the temperature, be sure to read the hddtemp man page before sending a report (section REPORT). Thanks. > smartctl -a /dev/sda smartctl version 5.38 [x86_64-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Western Digital Scorpio family Device Model: WDC WD2500BEVS-75UST0 Serial Number: WD-WXC708849298 Firmware Version: 01.01A01 User Capacity: 250,059,350,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Thu Dec 10 10:22:12 2009 EET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (9600) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 115) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0003 187 186 021 Pre-fail Always - 1641 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1321 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x000e 100 253 051 Old_age Always - 0 9 Power_On_Hours 0x0032 092 092 000 Old_age Always - 6357 10 Spin_Retry_Count 0x0012 100 100 051 Old_age Always - 0 11 Calibration_Retry_Count 0x0012 100 100 051 Old_age Always - 0 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1267 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 67 193 Load_Cycle_Count 0x0032 188 188 000 Old_age Always - 36639 194 Temperature_Celsius 0x0022 106 095 000 Old_age Always - 41 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 051 Old_age Offline - 0 240 Head_Flying_Hours 0x0032 026 026 000 Old_age Always - 54317 241 Unknown_Attribute 0x0032 151 001 000 Old_age Always - 49724187296372 242 Unknown_Attribute 0x0032 200 200 000 Old_age Always - 6984765509 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Offline Completed without error 00% 4562 - # 2 Short offline Completed without error 00% 4558 - # 3 Short offline Completed without error 00% 3488 - # 4 Short offline Completed without error 00% 624 - # 5 Extended offline Completed without error 00% 316 - # 6 Short offline Completed without error 00% 1 - # 7 Short offline Interrupted (host reset) 80% 1 - # 8 Short offline Completed without error 00% 0 - # 9 Short offline Interrupted (host reset) 80% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. > hdparm -i /dev/sda /dev/sda: Model=WDC, FwRev=01.01A01, SerialNo=WD-WXC708849298 Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=50 BuffType=unknown, BuffSize=8192kB, MaxMultSect=16, MultSect=off CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=488397168 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6 AdvancedPM=yes: unknown setting WriteCache=enabled Drive conforms to: Unspecified: ATA/ATAPI-1,2,3,4,5,6,7 * signifies the current active mode