mainHddtemp - Support: sr #105553, Add ST3400633AS to database

 
 

sr #105553: Add ST3400633AS to database

Submitter:  Jon Leech <oddhack>
Submitted:  Sun 10 Sep 2006 07:10:00 PM UTC
   
 
Category:  None Priority:  5 - Normal
Severity:  2 - Minor Status:  None
Privacy:  Public Assigned to:  None
Open/Closed:  Open Operating System:  GNU/Linux
* Mandatory Fields

Add a New Comment Rich Markup
   

Sun 10 Sep 2006 07:10:00 PM UTC, original submission:  

    (I tried reporting this to your guzu.net email address,
but got repeated procmail errors from your end over the space
of a week - maybe your spool is full?)

    Running hddtemp 0.3-beta15 on a FC5/Athlon XP system, I seem
to be successful with a Seagate ST3400633AS (400GB Barracuda
7200.9) SATA drive.

    Started with field 194 = 36 at idle, then increased it to 41
by running two sustained reads (find.|cpio) on different
partitions. Fields 7 and 195 also changed, but in a non-monotonic
fashion. Field 190 appears to duplicate field 194. I added this
line to hddtemp.db:

> "ST3400633AS"             194  C  "Seagate 400GB ST3400633AS"


    Thanks for writing this - a very nifty utility!

    hddtemp output follows:
------------------------------------------------------------------------
% hddtemp /dev/sda
WARNING: Drive /dev/sda doesn't appear in the database of supported drives
WARNING: But using a common value, it reports something.
WARNING: Note that the temperature shown could be wrong.
WARNING: See --help, --debug and --drivebase options.
WARNING: And don't forget you can add your drive to hddtemp.db
/dev/sda: ST3400633AS:  38°C or °F

% hddtemp --debug /dev/sda

================= hddtemp 0.3-beta15 ==================
Model: ST3400633AS

field(1)         = 232
field(3)         = 0
field(4)         = 13
field(5)         = 0
field(7)         = 110
field(9)         = 22
field(10)        = 0
field(12)        = 17
field(187)       = 0
field(189)       = 0
field(190)       = 38
field(194)       = 38
field(195)       = 4
field(197)       = 0
field(198)       = 0
field(199)       = 0
field(200)       = 0
field(202)       = 0

    If one of the field value seems to match the temperature, be sure to read
the hddtemp man page before sending a report (section REPORT). Thanks.
------------------------------------------------------------------------


Jon Leech <oddhack>

 

(Note: upload size limit is set to 16384 kB, after insertion of the required escape characters.)

Attach Files:
   
   
Comment:
   

No files currently attached

 

Depends on the following items: None found

Items that depend on this one: None found

 

CC list is empty

 

There are 0 votes so far. Votes easily highlight which items people would like to see resolved in priority, independently of the priority of the item set by tracker managers.

Only logged-in users can vote.

 

No changes have been made to this item

Back to the top

Powered by Savane 3.13-758e.
Corresponding source code