bugGNU FreeIPMI - Bugs: bug #8406, Sensors fails to catch Voltage...

 
 

bug #8406: Sensors fails to catch Voltage ALERT on sensor 12 in default mode

Submitter:  Joseph Ruscio <jruscio>
Submitted:  Thu 01 Apr 2004 04:45:32 AM UTC
   
 
Category:  sensors Severity:  3 - Normal
Priority:  5 - Normal Item Group:  Improper Behaviour
Status:  Fixed Privacy:  Public
Assigned to:  balamurugan Open/Closed:  Closed
Operating System:  None
* Mandatory Fields

Add a New Comment Rich Markup
   

Fri 02 Apr 2004 12:09:44 AM UTC, comment #1: 

fixed type conversion data loss.

Balamurugan <balamurugan>
Thu 01 Apr 2004 04:45:32 AM UTC, original submission:  

Sensors fails to catch a voltage alert condition in default mode. It properly detects the alert condition in both verbose and very verbose mode. Is the same code being used to check alert conditions for all three verbosity levels?

Repeatable Example:
 
jruscio@cdcdev:~/work/freeipmi_ft$ sudo sensors -s 12
12: Proc Bd +1.2V (Voltage): 1.22 V (low=1.18/nom=1.20/high=1.21) [OK]

jruscio@cdcdev:~/work/freeipmi_ft$ sudo sensors -v -s 12
Record ID: 12
Sensor type: Proc Bd +1.2V (Voltage)
Sensor number: #29
Event/Reading type code: 01h
Lower non-recoverable threshold: 0.00 Volts
Upper non-recoverable threshold: 0.00 Volts
Lower Critical threshold: 1.08 Volts
Upper Critical threshold: 1.31 Volts
Lower non-critical threshold: 0.00 Volts
Upper non-critical threshold: 0.00 Volts
Sensor min. reading: 0.00 Volts
Sensor max. reading: 3.06 Volts
Normal min.: 1.18 Volts
Nominal reading: 1.20 Volts
Normal max: 1.21 Volts
Sensor reading: 1.22 Volts
Sensor status: ALERT

jruscio@cdcdev:~/work/freeipmi_ft$ sudo sensors -vv -s 12
Record ID: 12
Sensor type: Proc Bd +1.2V (Voltage)
Sensor number: #29
Event/Reading type code: 01h
Lower non-recoverable threshold: 0.00 Volts
Upper non-recoverable threshold: 0.00 Volts
Lower Critical threshold: 1.08 Volts
Upper Critical threshold: 1.31 Volts
Lower non-critical threshold: 0.00 Volts
Upper non-critical threshold: 0.00 Volts
Sensor min. reading: 0.00 Volts
Sensor max. reading: 3.06 Volts
Normal min.: 1.18 Volts
Nominal reading: 1.20 Volts
Normal max: 1.21 Volts
Sensor reading: 1.22 Volts
Sensor status: ALERT

Joseph Ruscio <jruscio>

 

(Note: upload size limit is set to 16384 kB, after insertion of the required escape characters.)

Attach Files:
   
   
Comment:
   

No files currently attached

 

Depends on the following items: None found

Items that depend on this one: None found

 

CC list is empty

 

There are 0 votes so far. Votes easily highlight which items people would like to see resolved in priority, independently of the priority of the item set by tracker managers.

Only logged-in users can vote.

 

Follow 3 latest changes.

Date Changed by Updated Field Previous Value => Replaced by
2004-04-02 balamurugan StatusNone Fixed
    Assigned toNone balamurugan
    Open/ClosedOpen Closed

Back to the top

Powered by Savane 3.13-caa5.
Corresponding source code