bugAVR Downloader/UploaDEr - Bugs: bug #20238, error in m8535 program in fc4 linux

 
 

You are not allowed to post comments on this tracker with your current authentication level.

bug #20238: error in m8535 program in fc4 linux

Submitter:  Sasikumar <sasi_srivi>
Submitted:  Fri 22 Jun 2007 09:50:57 AM UTC
   
 
Category:  None Severity:  3 - Normal
Priority:  5 - Normal Item Group:  None
Status:  Invalid Privacy:  Public
Assigned to:  None Originator Name:  Sasikumar
Open/Closed:  Closed Release:  None
Programmer hardware:  Device type: 

Mon 29 Oct 2007 09:57:35 PM UTC, comment #2: 

Timed out sending the requested feedback.

Guessing from the command-line mentioned in the bug report,
I assume the -c dapa programmer could be meant.

Joerg Wunsch <joerg_wunsch>
Group administrator
Fri 22 Jun 2007 06:30:48 PM UTC, comment #1: 

You did not even write which programmer you are using.

As you can read in the message, the programmer type you
requested simply does not exist.  That's hardly avrdude's
fault.

In order to get help, tell us a bit more about your setup.

p.s.: Filing bug reports to get usage help is not the best
way.  Better subscribe to <avr-chat@nongnu.org>, and ask
there for help.

Joerg Wunsch <joerg_wunsch>
Group administrator
Fri 22 Jun 2007 09:50:57 AM UTC, original submission:  

Hi all
I am using atmega8535. and i am using uisp and avrdude it is not working , the fooling error is coming.


[root@acc35 m8535]# avrdude -p atmega8535  -c depa -U flash:w:disp_g.hex -v -v -v
 
avrdude: Version 5.3.1, compiled on Jun 22 2007 at 14:23:25
         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
 
         System wide configuration file is "/usr/local/etc/avrdude.conf"
         User configuration file is "/root/.avrduderc"
         User configuration file does not exist or is not a regular file, skipping
 
 
avrdude: Can't find programmer id "depa"
 
Valid programmers are:
  dasa3    = serial port banging, reset=!dtr sck=rts mosi=txd miso=cts [/usr/local/etc/avrdude.conf:757]
  dasa     = serial port banging, reset=rts sck=dtr mosi=txd miso=cts [/usr/local/etc/avrdude.conf:744]
  siprog   = Lancos SI-Prog <http://www.lancos.com/siprogsch.html> [/usr/local/etc/avrdude.conf:731]
  ponyser  = design ponyprog serial, reset=!txd sck=rts mosi=dtr miso=cts [/usr/local/etc/avrdude.conf:718]
  frank-stk200 = Frank STK200                   [/usr/local/etc/avrdude.conf:683]
  blaster  = Altera ByteBlaster             [/usr/local/etc/avrdude.conf:670]
  ere-isp-avr = ERE ISP-AVR <http://www.ere.co.th/download/sch050713.pdf> [/usr/local/etc/avrdude.conf:660]
  atisp    = AT-ISP V1.1 programming cable for AVR-SDK1 from <http://micro-research.co.th/>  [/usr/local/etc/avrdude.conf:650]
  dapa     = Direct AVR Parallel Access cable [/usr/local/etc/avrdude.conf:639]
  xil      = Xilinx JTAG cable              [/usr/local/etc/avrdude.conf:626]
  futurlec = Futurlec.com programming cable. [/usr/local/etc/avrdude.conf:609]
  abcmini  = ABCmini Board, aka Dick Smith HOTCHIP [/usr/local/etc/avrdude.conf:599]
  picoweb  = Picoweb Programming Cable, http://www.picoweb.net/ [/usr/local/etc/avrdude.conf:589]
  sp12     = Steve Bolt's Programmer        [/usr/local/etc/avrdude.conf:578]
  alf      = Nightshade ALF-PgmAVR, http://nightshade.homeip.net/ [/usr/local/etc/avrdude.conf:562]
  bascom   = Bascom SAMPLE programming cable [/usr/local/etc/avrdude.conf:552]
  dt006    = Dontronics DT006               [/usr/local/etc/avrdude.conf:542]
  pony-stk200 = Pony Prog STK200               [/usr/local/etc/avrdude.conf:530]
  stk200   = STK200                         [/usr/local/etc/avrdude.conf:514]
  bsd      = Brian Dean's Programmer, http://www.bsdhome.com/avrdude/ [/usr/local/etc/avrdude.conf:503]
  pavr     = Jason Kyle's pAVR Serial Programmer [/usr/local/etc/avrdude.conf:495]
  dragon_dw = Atmel AVR Dragon in debugWire mode [/usr/local/etc/avrdude.conf:488]
  dragon_hvsp = Atmel AVR Dragon in HVSP mode  [/usr/local/etc/avrdude.conf:480]
  dragon_pp = Atmel AVR Dragon in PP mode    [/usr/local/etc/avrdude.conf:472]
  dragon_isp = Atmel AVR Dragon in ISP mode   [/usr/local/etc/avrdude.conf:464]
  dragon_jtag = Atmel AVR Dragon in JTAG mode  [/usr/local/etc/avrdude.conf:456]
  jtag2dw  = Atmel JTAG ICE mkII in debugWire mode [/usr/local/etc/avrdude.conf:448]
  jtag2isp = Atmel JTAG ICE mkII in ISP mode [/usr/local/etc/avrdude.conf:440]
  jtag2    = Atmel JTAG ICE mkII            [/usr/local/etc/avrdude.conf:432]
  jtag2fast = Atmel JTAG ICE mkII            [/usr/local/etc/avrdude.conf:424]
  jtag2slow = Atmel JTAG ICE mkII            [/usr/local/etc/avrdude.conf:416]
  jtagmkII = Atmel JTAG ICE mkII            [/usr/local/etc/avrdude.conf:408]
  jtag1slow = Atmel JTAG ICE (mkI)           [/usr/local/etc/avrdude.conf:401]
  jtag1    = Atmel JTAG ICE (mkI)           [/usr/local/etc/avrdude.conf:393]
  jtagmkI  = Atmel JTAG ICE (mkI)           [/usr/local/etc/avrdude.conf:385]
  avr911   = Atmel AppNote AVR911 AVROSP    [/usr/local/etc/avrdude.conf:379]
  avr109   = Atmel AppNote AVR109 Boot Loader [/usr/local/etc/avrdude.conf:373]
  butterfly = Atmel Butterfly Development Board [/usr/local/etc/avrdude.conf:367]
  usbasp   = USBasp, http://www.fischl.de/usbasp/ [/usr/local/etc/avrdude.conf:361]
  avr910   = Atmel Low Cost Serial Programmer [/usr/local/etc/avrdude.conf:355]
  stk500hvsp = Atmel STK500 V2 in high-voltage serial programming mode [/usr/local/etc/avrdude.conf:349]
  stk500pp = Atmel STK500 V2 in parallel programming mode [/usr/local/etc/avrdude.conf:343]
  stk500v2 = Atmel STK500 Version 2.x firmware [/usr/local/etc/avrdude.conf:337]
  stk500v1 = Atmel STK500 Version 1.x firmware [/usr/local/etc/avrdude.conf:331]
  stk500   = Atmel STK500                   [/usr/local/etc/avrdude.conf:325]
  avrisp2  = Atmel AVR ISP mkII             [/usr/local/etc/avrdude.conf:315]
  avrispmkII = Atmel AVR ISP mkII             [/usr/local/etc/avrdude.conf:309]
  avrispv2 = Atmel AVR ISP V2               [/usr/local/etc/avrdude.conf:303]
  avrisp   = Atmel AVR ISP                  [/usr/local/etc/avrdude.conf:297]
 
[root@acc35 m8535]#

Sasikumar <sasi_srivi>

 

(Note: upload size limit is set to 16384 kB, after insertion of the required escape characters.)

No files currently attached

 

Depends on the following items: None found

Items that depend on this one: None found

 

Carbon-Copy List
  • -email is unavailable- added by joerg_wunsch (Posted a comment)
  • -email is unavailable- added by sasi_srivi (Submitted the item)
  •  

    There are 0 votes so far. Votes easily highlight which items people would like to see resolved in priority, independently of the priority of the item set by tracker managers.

     

    Follow 4 latest changes.

    Date Changed by Updated Field Previous Value => Replaced by
    2007-10-29 joerg_wunsch StatusNeed Info Invalid
        Open/ClosedOpen Closed
    2007-06-22 joerg_wunsch StatusNone Need Info
    2007-06-22 sasi_srivi Carbon-Copy- Added -email is unavailable-

    Back to the top

    Powered by Savane 3.13-4b48.
    Corresponding source code