bugAVR Downloader/UploaDEr - Bugs: bug #27207, very slow with JTAGICE MKII using...

 
 

You are not allowed to post comments on this tracker with your current authentication level.

bug #27207: very slow with JTAGICE MKII using jtag2isp

Submitter:  Markus Schulz <alpharesearch>
Submitted:  Sun 09 Aug 2009 04:33:37 AM UTC
   
 
Category:  None Severity:  3 - Normal
Priority:  5 - Normal Item Group:  None
Status:  Need Info Privacy:  Public
Assigned to:  joerg_wunsch Originator Name:  Markus Schulz
Open/Closed:  Open Release:  None
Programmer hardware:  Device type: 

Tue 14 Oct 2014 06:58:33 PM UTC, comment #3: 

Isn't this slowness due to the default slow bit clock? With jtag3isp, the default clock is terribly slow, adding `-B 1` to the commandline speeds things up a lot.

 Matthijs Kooijman <matthijs>
Wed 11 Sep 2013 04:35:02 PM UTC, comment #2: 

Can you try this with a recent version, preferrably with the
SVN version (or 6.0rc1)?

 Joerg Wunsch <joerg_wunsch>
Group administrator
Wed 12 Aug 2009 03:08:01 AM UTC, comment #1: 

I just tried the arduino isp and it also is very slow, is this maybe releated to the AT90S2313 and the missing PAGEL and BS2?

Thanks,
Markus

avrdude -s -U HIDKeys.hex -c avrisp -p 2313 -P /dev/ttyUSB0 -b 19200

avrdude: please define PAGEL and BS2 signals in the configuration file for part AT90S2313
avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.13s

avrdude: Device signature = 0x1e9101
avrdude: NOTE: FLASH memory has been specified, an erase cycle will be performed
         To disable this feature, specify the -D option.
avrdude: erasing chip
avrdude: please define PAGEL and BS2 signals in the configuration file for part AT90S2313
avrdude: reading input file "HIDKeys.hex"
avrdude: input file HIDKeys.hex auto detected as Intel Hex
avrdude: writing flash (1928 bytes):

Writing | ################################################## | 100% 245.38s

avrdude: 1928 bytes of flash written
avrdude: verifying flash memory against HIDKeys.hex:
avrdude: load data flash data from input file HIDKeys.hex:
avrdude: input file HIDKeys.hex auto detected as Intel Hex
avrdude: input file HIDKeys.hex contains 1928 bytes
avrdude: reading on-chip flash data:

Reading | ################################################## | 100% 82.08s

avrdude: verifying ...
avrdude: 1928 bytes of flash verified

avrdude done.  Thank you.

Markus Schulz <alpharesearch>
Sun 09 Aug 2009 04:33:37 AM UTC, original submission:  

It takes between 1 to 4 minutes to program the 2kb, sometime I get write errors and I need to restart (I have the same issues with AVRDUDE under Linux and Windows, the Avr Studio (gui and command line) works fine (takes like 5 seconds to program)... please let me know what to send in that gives additional help.

Thanks Markus

PS: here are some screens:

markus@ubuntu:~/avr/HIDKeys linux .2007-03-29_5keys_send$ avrdude -c jtag2isp -p 2313 -P usb -vv

avrdude: Version 5.8, compiled on Aug  7 2009 at 23:01:12
         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
         Copyright (c) 2007-2009 Joerg Wunsch

         System wide configuration file is "/usr/local/etc/avrdude.conf"
         User configuration file is "/home/markus/.avrduderc"

         Using Port                    : usb
         Using Programmer              : jtag2isp
avrdude: stk500v2_jtagmkII_open()
avrdude: usbdev_open(): Found JTAGICE mkII, serno: 07000000066E
avrdude: usbdev_open(): using read endpoint 0x82
avrdude: jtagmkII_getsync(): Sending sign-on command: 0x86 (28 bytes msg)
JTAG ICE mkII sign-on message:
Communications protocol version: 1
M_MCU:
  boot-loader FW version:        255
  firmware version:              6.02
  hardware version:              0
S_MCU:
  boot-loader FW version:        255
  firmware version:              6.02
  hardware version:              1
Serial number:                   07:00:00:00:06:6e
Device ID:                       JTAGICEmkII
avrdude: jtagmkII_setparm()
avrdude: jtagmkII_setparm(): Sending set parameter command (parm 0x03, 1 bytes): 0x80 (1 bytes msg)
avrdude: jtagmkII_getsync(): Sending get sync command: 0x80 (1 bytes msg)
         AVR Part                      : AT90S2313
         Chip Erase delay              : 20000 us
         PAGEL                         : P00
         BS2                           : P00
         RESET disposition             : dedicated
         RETRY pulse                   : SCK
         serial program mode           : yes
         parallel program mode         : yes
         Timeout                       : 200
         StabDelay                     : 100
         CmdexeDelay                   : 25
         SyncLoops                     : 32
         ByteDelay                     : 0
         PollIndex                     : 3
         PollValue                     : 0x53
         Memory Detail                 :

                                  Block Poll               Page                       Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
           eeprom         4    12    64    0 no        128    0      0  4000  9000 0x80 0x7f
           flash          4    12   128    0 no       2048    0      0  4000  9000 0x7f 0x7f
           signature      0     0     0    0 no          3    0      0     0     0 0x00 0x00
           fuse           0     0     0    0 no          1    0      0     0     0 0x00 0x00
           lock           0     0     0    0 no          1    0      0  9000  9000 0x00 0x00

         Programmer Type : JTAGMKII_ISP
         Description     : Atmel JTAG ICE mkII in ISP mode
avrdude: jtagmkII_getparm()
avrdude: jtagmkII_getparm(): Sending get parameter command (parm 0x06): 0x81 (3 bytes msg)
         Vtarget         : 3.3 V
         SCK period      : 1.00 us

avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.15s

avrdude: Device signature = 0x1e9101
avrdude: safemode: Fuse reading not support by programmer.
              Safemode disabled.
avrdude: current erase-rewrite cycle count is 2147483647 (if being tracked)
avrdude: jtagmkII_close()
avrdude: jtagmkII_close(): Sending GO command: 0xa4 (1 bytes msg)
avrdude: jtagmkII_close(): bad response to GO command: RSP_ILLEGAL_EMULATOR_MODE
avrdude: jtagmkII_close(): Sending sign-off command: 0x80 (1 bytes msg)

avrdude done.  Thank you.

markus@ubuntu:~/avr/HIDKeys linux .2007-03-29_5keys_send$ make flash
avrdude -s -U HIDKeys.hex -c jtag2isp -p 2313 -P usb -D

avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.15s

avrdude: Device signature = 0x1e9101
avrdude: current erase-rewrite cycle count is 2147483647 (if being tracked)
avrdude: reading input file "HIDKeys.hex"
avrdude: input file HIDKeys.hex auto detected as Intel Hex
avrdude: writing flash (1928 bytes):

Writing | ################################################## | 100% 225.32s

avrdude: 1928 bytes of flash written
avrdude: verifying flash memory against HIDKeys.hex:
avrdude: load data flash data from input file HIDKeys.hex:
avrdude: input file HIDKeys.hex auto detected as Intel Hex
avrdude: input file HIDKeys.hex contains 1928 bytes
avrdude: reading on-chip flash data:

Reading | ################################################## | 100% 98.28s

avrdude: verifying ...
avrdude: 1928 bytes of flash verified
avrdude: jtagmkII_close(): bad response to GO command: RSP_ILLEGAL_EMULATOR_MODE

avrdude done.  Thank you.


Markus Schulz <alpharesearch>

 

(Note: upload size limit is set to 16384 kB, after insertion of the required escape characters.)

No files currently attached

 

Depends on the following items: None found

Items that depend on this one: None found

 

Carbon-Copy List
  • -email is unavailable- added by matthijs (Posted a comment)
  • -email is unavailable- added by joerg_wunsch (Posted a comment)
  • -email is unavailable- added by alpharesearch (Submitted the item)

    •  

    There are 0 votes so far. Votes easily highlight which items people would like to see resolved in priority, independently of the priority of the item set by tracker managers.

     

    Follow 2 latest changes.

    Date Changed by Updated Field Previous Value => Replaced by
    2013-09-11 joerg_wunsch StatusNone Need Info
        Assigned toNone joerg_wunsch

    Back to the top

    Copyright © 2024 Free Software Foundation, Inc.
    Verbatim copying and distribution of this entire article is permitted in any medium, provided this notice is preserved.
    The Levitating, Meditating, Flute-playing Gnu logo is a GNU GPL'ed image provided by the Nevrax Design Team.
    Page source code

    Powered by Savane 3.13-8a8d.
    Corresponding source code