mainUSBB2K-API - Support: sr #105356, USBB2K-API handset Error

 
 

sr #105356: USBB2K-API handset Error

Submitter:  Paolo <robbtek>
Submitted:  Fri 19 May 2006 06:04:24 PM UTC
   
 
Category:  None Priority:  5 - Normal
Severity:  3 - Normal Status:  None
Privacy:  Public Assigned to:  None
Open/Closed:  Open Operating System:  None
* Mandatory Fields

Add a New Comment Rich Markup
   

Fri 19 May 2006 06:04:24 PM UTC, original submission:  

Salve ,

Ho un telefono usb , correttamente collegato al mio pc linux (Fedora Core4 2.6.16-1.2108).

Ho compilato il modulo yealink e l'ho caricato con il comando "modprobe yealink" .

Ho compilato usbb2k-api (cvs) ed ho fatto alcuni test .

Innanzitutto , il telefono funziona perfettamente, ma solo come periferica audio .
Posso quindi utilizzarlo per parlare ed ascoltare le telefonate .
Il problema è che non riesco ad utilizzare la tastiera del telefono .

Ho fatto alcune prove con x-lite ed ekiga , ma nulla da fare .

Ho quindi fatto dei test con il tool api_connect

Ecco i risultati :


# dmesg

usbcore: registered new driver yealink
/root/voip/yealink-module/yealink-module/yealink.c: Yealink phone driver:yld-20060503
ohci_hcd 0000:00:02.0: wakeup
usb 2-3: new full speed USB device using ohci_hcd and address 3
usb 2-3: not running at top speed; connect to a high speed hub
usb 2-3: configuration #1 chosen from 1 choice
hiddev96: USB HID v1.00 Device [Yealink Network Technology Ltd. VOIP USB Phone           ] on usb-0000:00:02.0-3

# tail /var/log/messages
May 19 19:50:13 fedora kernel: usbcore: registered new driver yealink
May 19 19:50:13 fedora kernel: /root/voip/yealink-module/yealink-module/yealink.c: Yealink phone driver:yld-20060503
May 19 19:50:19 fedora kernel: ohci_hcd 0000:00:02.0: wakeup
May 19 19:50:19 fedora kernel: usb 2-3: new full speed USB device using ohci_hcd and address 3
May 19 19:50:19 fedora kernel: usb 2-3: not running at top speed; connect to a high speed hub
May 19 19:50:19 fedora kernel: usb 2-3: configuration #1 chosen from 1 choice
May 19 19:50:20 fedora kernel: hiddev96: USB HID v1.00 Device [Yealink Network Technology Ltd. VOIP USB Phone           ] on usb-0000:00:02.0-3


# src/usbb2k_api
# tools/api_connect /tmp/usbb2k.sock

Trying to connect...
Connected.
SEND> RECV> USB DEVICE FOUND 003
RECV> HANDSET OFF

# tail /var/log/messages

May 19 19:51:13 fedora usbb2k_api[17289]: usbb2k init ok
May 19 19:51:58 fedora usbb2k_api[17289]: Init usb
May 19 19:51:58 fedora usbb2k_api[17289]: Thread USB


Poi ho provato con il comando ...

SEND> SWITCH USB

Ed ho ricevuto il messaggio ...

SEND> RECV> HANDSET OFF
HANDSET OFF
RECV> HANDSET OFF
RECV> HANDSET OFF

Ed il led del telefono si è spento .

# tail /var/log/messages

May 19 19:57:15 fedora usbb2k_api[17289]: RECV CMD:[SWITCH USB]
May 19 19:57:15 fedora usbb2k_api[17289]: error: 0
May 19 19:57:15 fedora usbb2k_api[17289]: handset Error
May 19 19:57:16 fedora usbb2k_api[17289]: error: -110
May 19 19:57:16 fedora usbb2k_api[17289]: handset Error


Qualcuno puo' aiutarmi a risolvere il problema ?


Grazie mille


Paolo

Paolo <robbtek>

 

(Note: upload size limit is set to 16384 kB, after insertion of the required escape characters.)

Attach Files:
   
   
Comment:
   

No files currently attached

 

Depends on the following items: None found

Items that depend on this one: None found

 

CC list is empty

 

There are 0 votes so far. Votes easily highlight which items people would like to see resolved in priority, independently of the priority of the item set by tracker managers.

Only logged-in users can vote.

 

No changes have been made to this item

Back to the top

Powered by Savane 3.13-cf05.
Corresponding source code