bugGnoppix - Bugs: bug #6263, Gnoppix 0.6.0-beta 2 doesn't...

 
 

bug #6263: Gnoppix 0.6.0-beta 2 doesn't recognize USB mouse

Submitter:  Corey Puffalt <Yeroc>
Submitted:  Fri 31 Oct 2003 04:27:23 AM UTC
   
 
Category:  booting Severity:  1 - Wish
Item Group:  Problem Status:  None
Privacy:  Public Assigned to:  cyberdune
Open/Closed:  Closed
* Mandatory Fields

Add a New Comment Rich Markup
   

Jump to the original submission

Fri 14 Nov 2003 11:41:07 PM UTC, comment #6: 

It is not a BUG if a feature is not implemented.
Or is it a BUG that my nissan glxr has no 4x4 ?

Gnoppix does NOT use the same HW detection as Knoppix.

But maybe updated next Release.

Markus Maiwald <cyberdune>
Wed 12 Nov 2003 03:45:22 PM UTC, comment #5: 

It does seem to be a gnoppix-specific bug.  Both Knoppix & Morphix detect and support the USB mouse on my machine.

Corey Puffalt <Yeroc>
Tue 04 Nov 2003 10:41:18 PM UTC, comment #4: 

Well now,
This is not a Gnoppix-Specific bug.
But nevertheless it is making me quiet angry as the main Companies are not constructing de-facto standarts.

It would be better to ask your question again in a newsgroup, comp.os.linux.hardware or whatever.

It has to do with the nVidia Chipsets and the USB-OHCI modul.
Try to buy only chipsets supporting USB-UHCI next time, I can't help you there what this could be in detail

:-((

regards,
cyb

Markus Maiwald <cyberdune>
Tue 04 Nov 2003 04:27:58 AM UTC, comment #3: 

I did see some errors in the "dmesg" output related to usb.  Here's part of the dmesg output as well:
...
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 20:07:00 Oct 11 2003
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
PCI: Setting latency timer of device 00:02.0 to 64
usb-ohci.c: USB OHCI at membase 0xe1135000, IRQ 20
usb-ohci.c: usb-00:02.0, PCI device 10de:0067 (nVidia Corporation)
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 3 ports detected
PCI: Setting latency timer of device 00:02.1 to 64
usb-ohci.c: USB OHCI at membase 0xe1137000, IRQ 22
usb-ohci.c: usb-00:02.1, PCI device 10de:0067 (nVidia Corporation)
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
usbdevfs: remount parameter error
hub.c: new USB device 00:02.0-3, assigned address 2
usb_control/bulk_msg: timeout
usb-ohci.c: unlink URB timeout
usb.c: USB device not responding, giving up (error=-12)
hub.c: new USB device 00:02.0-3, assigned address 3
usb_control/bulk_msg: timeout
usb-ohci.c: unlink URB timeout
usb.c: USB device not accepting new address=3 (error=-110)
hub.c: new USB device 00:02.1-1, assigned address 2
usb_control/bulk_msg: timeout
usb-ohci.c: unlink URB timeout
usb.c: unable to get device descriptor (error=-12)
hub.c: new USB device 00:02.1-1, assigned address 3
...
usb_control/bulk_msg: timeout
usb-ohci.c: unlink URB timeout
usb.c: USB device not accepting new address=3 (error=-110)
...
hub.c: new USB device 00:02.1-3, assigned address 4
usb_control/bulk_msg: timeout
usb-ohci.c: unlink URB timeout
usb.c: USB device not accepting new address=4 (error=-110)
hub.c: new USB device 00:02.1-3, assigned address 5
...
usb_control/bulk_msg: timeout
usb-ohci.c: unlink URB timeout
usb.c: USB device not accepting new address=5 (error=-110)


Corey Puffalt <Yeroc>
Tue 04 Nov 2003 04:24:20 AM UTC, comment #2: 

Ok... here are some more details on my machine...

It's a nForce2 motherboard (gigabyte ga-7n400).  The mouse is a pretty standard usb logitech wheelmouse.

lsusb output:
Bus 002 Device 001: ID 0000:0000 
Bus 001 Device 001: ID 0000:0000 

"cat /etc/mtab | grep usb" output:
usb /proc/bus/usb usbdevfs rw,devmode=0666 0 0

"cat /proc/modules" output:
input                   3072   0 (autoclean)
parport_pc             24968   1 (autoclean)
lp                      6336   0 (autoclean)
parport                21888   1 (autoclean) [parport_pc lp]
autofs4                 8100   1 (autoclean)
nls_cp437               4384   1 (autoclean)
nls_iso8859-1           2880   1 (autoclean)
ntfs                   49856   0 (autoclean)
xfs                   454336   0 (autoclean)
reiserfs              164832   0 (autoclean)
ext3                   61440   0 (autoclean)
jbd                    43620   0 (autoclean) [ext3]
msdos                   4764   0 (autoclean)
vfat                    9276   1 (autoclean)
fat                    29304   0 (autoclean) [msdos vfat]
i810_audio             22688   1
ac97_codec             10496   0 [i810_audio]
soundcore               3300   2 [i810_audio]
usb-ohci               17792   0 (unused)
usbcore                55456   1 [usb-ohci]
unix                   13988 148 (autoclean)
cloop                   8256   2
sr_mod                 12344   0 (unused)
ide-scsi                8800   0
sg                     23844   0 (unused)
ide-cd                 28384   1
cdrom                  26816   0 [sr_mod ide-cd]



Corey Puffalt <Yeroc>
Sat 01 Nov 2003 02:47:23 PM UTC, comment #1: 

Yes, give us more details please!

lsusb
cat /etc/mtab | grep usb
cat /proc/modules
Your mainboard

etc..

Markus Maiwald <cyberdune>
Fri 31 Oct 2003 04:27:23 AM UTC, original submission:  

After booting up gnoppix does not detect my USB mouse.  Knoppix detects it fine...

Let me know if you need further details.

Corey Puffalt <Yeroc>

 

(Note: upload size limit is set to 16384 kB, after insertion of the required escape characters.)

Attach Files:
   
   
Comment:
   

No files currently attached

 

Depends on the following items: None found

Items that depend on this one: None found

 

CC list is empty

 

There are 0 votes so far. Votes easily highlight which items people would like to see resolved in priority, independently of the priority of the item set by tracker managers.

Only logged-in users can vote.

 

Follow 4 latest changes.

Date Changed by Updated Field Previous Value => Replaced by
2003-11-11 cyberdune Open/ClosedOpen None
2003-11-04 cyberdune Severity2,5 None
2003-11-01 cyberdune Severity3 - Normal None
    Assigned toNone None

Back to the top

Powered by Savane 3.13-aa77.
Corresponding source code