mainHddtemp - Support: sr #109304, SAMSUNG MZ7KM960HAHP-0E050 has...

 
 

sr #109304: SAMSUNG MZ7KM960HAHP-0E050 has temperature sensor at #190

Submitter:  None
Submitted:  Mon 01 May 2017 03:08:26 AM UTC
   
 
Category:  None Priority:  5 - Normal
Severity:  3 - Normal Status:  None
Privacy:  Public Assigned to:  None
Originator Email:  -email is unavailable- Open/Closed:  Open
Operating System:  GNU/Linux
* Mandatory Fields

Add a New Comment Rich Markup
   

Mon 01 May 2017 03:08:26 AM UTC, original submission:  

Hi there,

just to let you know - SAMSUNG MZ7KM960HAHP-0E050 has temperature sensor, but not in field #194, but #190.

Please find below hddtemp --debug, hdparm  -i, and smartctl -a dump.

adding this line to /etc/hddtemp.db

"SAMSUNG MZ7KM960HAHP-0E050"                            190  C  "Samsung SSD MZ7KM960HAHP"

does the job:

hddtemp  /dev/sda
/dev/sda: SAMSUNG MZ7KM960HAHP-0E050              �: 50°C

Thanks a lot for maintaining hddtemp!

Kind regards,

Martin


----------------------

hddtemp --debug /dev/sda

================= hddtemp 0.3-beta15 ==================
Model: SAMSUNG MZ7KM960HAHP-0E050          

field(5)         = 0
field(9)         = 167
field(12)        = 25
field(177)       = 4
field(179)       = 0
field(180)       = 45
field(181)       = 0
field(182)       = 0
field(183)       = 0
field(184)       = 0
field(187)       = 0
field(190)       = 45
field(195)       = 0
field(197)       = 0
field(199)       = 0
field(202)       = 0
field(235)       = 2
field(241)       = 227
field(242)       = 207
field(243)       = 0
field(244)       = 0
field(245)       = 255
field(246)       = 255
field(247)       = 255
field(251)       = 208

If one of the field value seems to match the temperature, be sure to read
the hddtemp man page before sending a report (section REPORT). Thanks.

----------------------

hdparm  -i /dev/sda

/dev/sda:

 Model=SAMSUNG MZ7KM960HAHP-0E005, FwRev=GXM1003Q, SerialNo=S2NFNX0H402299F
 Config={ Fixed }
 RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=0
 BuffType=unknown, BuffSize=unknown, MaxMultSect=16, MultSect=off
 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=1875385008
 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
 PIO modes:  pio0 pio1 pio2 pio3 pio4
 DMA modes:  mdma0 mdma1 mdma2
 UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6
 AdvancedPM=no WriteCache=enabled
 Drive conforms to: unknown:  ATA/ATAPI-2,3,4,5,6,7

  • signifies the current active mode


----------------------

smartctl -a /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-2-amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

START OF INFORMATION SECTION

Model Family:     Samsung based SSDs
Device Model:     SAMSUNG MZ7KM960HAHP-0E005
Serial Number:    S2NFNX0H402299F
LU WWN Device Id: 5 002538 c40285e66
Firmware Version: GXM1003Q
User Capacity:    960,197,124,096 bytes [960 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4c
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Mon May  1 10:47:34 2017 AWST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

START OF READ SMART DATA SECTION

SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                ( 3600) seconds.
Offline data collection
capabilities:                    (0x53) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        No Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  60) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   099   099   000    Old_age   Always       -       423
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       25
177 Wear_Leveling_Count     0x0013   099   099   005    Pre-fail  Always       -       4
179 Used_Rsvd_Blk_Cnt_Tot   0x0013   100   100   010    Pre-fail  Always       -       0
180 Unused_Rsvd_Blk_Cnt_Tot 0x0013   100   100   010    Pre-fail  Always       -       7725
181 Program_Fail_Cnt_Total  0x0032   100   100   010    Old_age   Always       -       0
182 Erase_Fail_Count_Total  0x0032   100   100   010    Old_age   Always       -       0
183 Runtime_Bad_Block       0x0013   100   100   010    Pre-fail  Always       -       0
184 End-to-End_Error        0x0033   100   100   097    Pre-fail  Always       -       0
187 Uncorrectable_Error_Cnt 0x0032   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0032   054   044   000    Old_age   Always       -       46
195 ECC_Error_Rate          0x001a   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   100   100   000    Old_age   Always       -       0
199 CRC_Error_Count         0x003e   100   100   000    Old_age   Always       -       0
202 Exception_Mode_Status   0x0033   100   100   010    Pre-fail  Always       -       0
235 POR_Recovery_Count      0x0012   099   099   000    Old_age   Always       -       2
241 Total_LBAs_Written      0x0032   099   099   000    Old_age   Always       -       6724941799
242 Total_LBAs_Read         0x0032   099   099   000    Old_age   Always       -       1733108399
243 SATA_Downshift_Ct       0x0032   100   100   000    Old_age   Always       -       0
244 Thermal_Throttle_St     0x0032   100   100   000    Old_age   Always       -       0
245 Timed_Workld_Media_Wear 0x0032   100   100   000    Old_age   Always       -       65535
246 Timed_Workld_RdWr_Ratio 0x0032   100   100   000    Old_age   Always       -       65535
247 Timed_Workld_Timer      0x0032   100   100   000    Old_age   Always       -       65535
251 NAND_Writes             0x0032   100   100   000    Old_age   Always       -       10994296528




Anonymous

 

(Note: upload size limit is set to 16384 kB, after insertion of the required escape characters.)

Attach Files:
   
   
Comment:
   

No files currently attached

 

Depends on the following items: None found

Items that depend on this one: None found

 

Carbon-Copy List
  • -email is unavailable- added by None (Submitted the item)
  •  

    There are 0 votes so far. Votes easily highlight which items people would like to see resolved in priority, independently of the priority of the item set by tracker managers.

    Only logged-in users can vote.

     

    No changes have been made to this item

    Back to the top

    Powered by Savane 3.13-02a9.
    Corresponding source code